1. You may wish to connect the WeCreat Vision via Wi-Fi instead of a USB cable connection. If so, please click the Settings button on the menu bar, and go to WiFi settings.
Note: Don't disconnect the USB cable until Wi-Fi setup is complete.
2. Select your home Wi-Fi network and connect to it. Input your Wi-Fi password if required.
Note: This product doesn't support 5GHz Wi-Fi connection. Please ensure your Wi-Fi modem/router supports and has activated the 2.4GHz connection.
3. When you see the message “Wi-Fi connected successfully”, close the settings window. Then you will see the machine is shown in the device list with a green dot on the right side, which means you are now connected to Vision wirelessly, eliminating the need for a USB connection.
Note: Sometimes due to the compatibility issue with specific Wi-Fi modem/routers, issues may arise with showing the machine's name in the device list, in that case you can manually add the device as follows:
-
Keep the USB cable connected between your computer and WeCreat Vision.
-
Open the Settings window, find the WLAN IP address, and write it down.
-
Navigate to the right side menu bar, click on the device list and click Add+. In the pop-up window, click on IP address tab, put in the IP address which you have just written down, then click Connect.
-
Now please check if the wireless connection is established.
If you still encounter issues with establishing the Wi-Fi connection, please feel free to contact us at support@wecreat.com. Our helpful and friendly support engineers are just one click away!