First of all, please be advised that the WeCreat Auto Passthrough conveyor is fully compatible with all WeCreat laser machines we have released.
Secondly, the WeCreat conveyor can also be used with some other vendors' laser machines, which should meet all the conditions below.
- The corresponding laser engraving machine's main board has a 2.54mm 4-pin terminal socket for connecting external devices. Alternatively, the Y-axis/U-axis motor wires support disconnection from the main board, allowing other devices to be connected to the corresponding ports on the main board. For your reference, we supply the following motor patch cord as an accessory in the conveyor's box.
- Supports direct control of the machine via LightBurn.
- The distance between the left and right feet of the laser engraving machine is between 500-620mm.
- When the laser engraving machine is placed flat on a table, the laser head can directly engrave on the table surface.